partial replacement of cement with marble powder

Project on Partial Replacement of Cement with Marble Powder

In this project our main objective is to study the influence of partial replacement of cement with marble powder , and to compare it with the compressive and tensile strength of ordinary M20 concrete. We are also trying to find the percentage of marble powder replaced in concrete that makes the strength of the concrete maximum.

(PDF) "Partial Replacement of Cement with Marble Dust Powder"

Vaidevi C (2013) Study on marble dust as partial replacement of cement in concrete.ISSN 2319 -7757.PP14-16. Partial Replacement of Cement with Marble Powder in Concrete Article

(PDF) Partial Replacement of Cement to Concrete by Marble ...

Leaving the waste materials to the environment directly can cause environmental problem. Hence the reuse of waste material has been emphasized. Partial replacement of cement by varying percentage of marble dust Powder powder reveals that increased

Partial Replacement of Cement With Marble Powder in Concrete

Partial replacement of marble powder in cement accordingly in the range of 20%, 30%, 40%, by weight for M20 grade of concrete. With this experimental research work the problem of waste production management of this agro waste are will be solved.

Partial Replacement of Cement with Marble Dust Powder

Corpus ID: 136124924. Partial Replacement of Cement with Marble Dust Powder @inproceedings{Sahu2016PartialRO, title={Partial Replacement of Cement with Marble Dust Powder}, author={Chandraprabha Sahu}, year={2016} }

Partial Replacement of Cement with Marble Dust Powder

flexural strengths. Partial replacement of cement by varying percentage of marble powder reveals that increased waste marble powder (WMP) ratio result in increased strengths of the mortar and ...

Partial Replacement of Cement with Marble Dust Powder

flexural strengths. Partial replacement of cement by varying percentage of marble powder reveals that increased waste marble powder (WMP) ratio result in increased strengths of the mortar and ...

Cement With Marble Powder(Partial Replacement) - YouTube

May 08, 2015 BEHAVIOUR OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT AND SAND WITH MARBLE POWDER AND QUARRY DUST - Duration: 4:03. Civil Engineering 11,028 views. 4:03.

Effects of Partial Replacement of Cement with Marble Dust ...

the percentage of marble dust powder for up to 10% partial replacement of cement with marble dust powder. With further increase in the percentage of marble dust powder the split tensile strength of concrete decreases.

Research Paper PARTIAL REPLACEMENT OF CEMENT WITH

increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the Split Tensile strength decreases. • Thus we found out the optimum percentage for replacement of marble powder with cement and it is almost 10% cement

The Effect of marble powder and silica fume as partial ...

Marble powder material (MP) is a very fine powder, obtained as a by-product of marble during the sawing and the shaping, and not recycling it due to environmental problems in the world.The possibility of using it and silica fume (S.F) separately as partial replacement of cement on mortar were studied and evaluated based upon the percentage of the partial cement replacement with both marble ...

Influence of Marble Powder Mortar and Concrete Mix

The use of waste marble powder (dust) was proposed in partial replacement of cement, for the production of Mortar and Concrete Mix. In particular, tests were conducted on the mortars and concrete mix cured for different times in order to determine their workability, flexural as

Partial Replacement of Cement with Marble Dust Powder by ...

Partial replacement of cement by varying percentage of marble powder reveals that increased waste marble powder (WMP) ratio result in increased strengths of the mortar and concrete .Leaving the ...

EXPERMENAL STUDIES ON M20 GRADE CONCRETE BY

which cement was partially replaced with marble dust powder (0%, 5%, 10%, 15%, 20%).The result indicated that the compressive strength of concrete increased with addition of waste marble powder up to 10% replaced by weight of cement and further addition of waste marble powder was found to decrease the compressive strength.

Cement Replacement in concrete with Marble Dust Powder

The project describes the feasibility of using marble dust with partial replacement of cement. Total 42 cubes were casted by using marble dust with partial replacement of cement in various percentage of (5%, 10%, 15%, 20%, 25%, and 30%) and compressive strength test were done after 7 days and 28 days. 1.1 Main Ingredients

EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF

partial replacement of zeolite concrete and conventional concrete. The content of water has been replaced by super plasticizer as per manual mix design according to IS 10262.The influence has been studied in different proportioning (0%, 10%, 20% 30%) of zeolite powder to improve the performance characteristics of concrete.

Partial Replacement of Cement with Marble Dust Powder by ...

Aug 25, 2015 Partial Replacement of Cement with Marble Dust Powder The waste generated from the industries cause environmental problems. Hence the reuse of this waste material can be emphasized.

An investigation on effect of partial replacement of ...

Talah et al. studied effect of marble powder used as partial substitute for Portland cement (PC) on durability mechanical properties of high performance concretes and found that marble powder could be used as partial replacement of Portland cement up to 15% in composite cement. The paper also suggested reduction in oxygen permeability ...

Influence of limestone waste as partial replacement ...

A. ErgünEffects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete. Turkey Turkey

Study of Properties of Concrete using Marble Powder and ...

[1] Nitisha Sharma studied the properties of Waste Marble Powder as a Partial Replacement in Cement Sand Mix This was done by replacing cement by a percentage of marble powder. Four basic concrete mixes were considered. When cement is replaced with marble powder up to 10% weight, high strength concrete was achieved.

Reserch Paper On Green Concrete Using Marble Powder

Research paper partial replacement of cement with marble dust powder this project describes the feasibility of using the marble sludge dust in concrete production as partial replacement of cement in india the marble different percentage of marble powder content in concrete the strength of concrete has been tested on.

The Effect of marble powder and silica fume as partial ...

Marble powder material (MP) is a very fine powder, obtained as a by-product of marble during the sawing and the shaping, and not recycling it due to environmental problems in the world.The possibility of using it and silica fume (S.F) separately as partial replacement of cement on mortar were studied and evaluated based upon the percentage of the partial cement replacement with both marble ...

Partial Replacement of Cement by Marble Dust Powder for ...

Marble stone industry generates both solid wastes and stone slurry. This paper focus on the utilization of waste of Marble dust powder in concrete and enhancement of strength of concrete more economically. The Marble dust powder was added in M20 grade of concrete at (0%, 5%, 10%, 15% 20%) with partial replacement by weight of cement.

Study of Properties of Concrete using Marble Powder and ...

[1] Nitisha Sharma studied the properties of Waste Marble Powder as a Partial Replacement in Cement Sand Mix This was done by replacing cement by a percentage of marble powder. Four basic concrete mixes were considered. When cement is replaced with marble powder up to 10% weight, high strength concrete was achieved.

Marble powder - slideshare.net

Sep 11, 2016 Marble powder 1. BY P.ROHITH S.NIHARIKA A.RANJITH B.AKSHAY P.JEEVAN Partial Replacement of Cement with Marble Powder 2. Objective of the project Introduction Nominal Mx Design Test Results and Graphs Conclusion Contents 3. Composition of Marble powder 4.

EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF

Rakesh Gupta studied on “Partial replacement of cement with marble powder” and concluded that for M 20 grade concrete the compressive strength of cubes are increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the compressive strength decreases.

concrete patch powder portland cement bentonite

gypsum powder in cement - flowagency What is the effect of mixing gypsum with white cement For partial replacement of cement with marble powder in concrete what kind of test should be carrid out on Cement plaster is a mixture of suitable plaster sand portland cement and water which is normally applied to masonry interiors and exteriors to achieve a smooth surface Interior

EXPERMENAL STUDIES ON M20 GRADE CONCRETE BY

which cement was partially replaced with marble dust powder (0%, 5%, 10%, 15%, 20%).The result indicated that the compressive strength of concrete increased with addition of waste marble powder up to 10% replaced by weight of cement and further addition of waste marble powder was found to decrease the compressive strength.

STRENGTH BEHAVIOUR OF CONCRETE PRODUCED WITH

7.5%, 15%, 22.5%, 30% by wt. partial replacement of cement with marble dust powder for making of cement concrete with 0.40 water cement ratio. Key words: Marble powder, concrete, compressive strength, split tensile test, flexure test. Cite this Article: Arun Kumar and Ankush Thakur, Strength Behaviour of Concrete

Cement Replacement in concrete with Marble Dust Powder

The project describes the feasibility of using marble dust with partial replacement of cement. Total 42 cubes were casted by using marble dust with partial replacement of cement in various percentage of (5%, 10%, 15%, 20%, 25%, and 30%) and compressive strength test were done after 7 days and 28 days. 1.1 Main Ingredients

PARTIAL REPLACEMENT OF CEMENT WITH MARBLE DUST POWDER

PARTIAL REPLACEMENT OF CEMENT WITH MARBLE DUST POWDER Address for Correspondence

Use of Waste Marble Powder as Partial Replacement in ...

using waste marble powder as partial replacement of cement and sand. Keywords: Waste marble powder, concrete, compressive strength, flexure strength, split-tensile strength, workability, durability. I. INTRODUCTION. Marble is obtained from the transformation of pure limestone. The purity of marble depends upon the colour of the marble.

An Experimental investigation on utilizations of Marble ...

3.2 COMPRESSIVE STRENGTH - Compressive strength of concrete mixes with various percentage of marble dust as replacement of cement at age of 7 days and 28 days respectively are shown in Fig.3 and Fig.4. From Table 10 and 11 it can be observed that with the replacement of cement with marble dust for 5% 10% there is an increase in the strength at 7days as well as at 28 days.

CIVIL - EXPERIMENTAL PROJECTS - Majestic Project

Partial Replacement of Cement by Fly Ash and Sand by Marble Dust CEX013. Partial Replacement of Cement with Jute Fibre CEX014. Experimental Investigation on Sawdust Ash as a Partial Replacement of Cement ... Experimental Investigation of Egg Shell Powder as Partial Replacement with Cement in Concrete